Dental Endo Apex Locator/Tooth Gum Cutter/Endo Obturation System Gun Heated Pen

Description

Gutta Percha Obturation Pen J1SS
Obturation Pen
Temperature sensor IC type
Heating time 2 Seconds
Temperature range 160-240
℃
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100-240V Output: DC 4.5V
Charging time 4 hours
Continuous heat-up time for gun after fully charging 60 minutes
Continuous heat-up time for pen after fully charing 30 minutes
Battery (Li-on)
Capacity: DC3.6 V 2.2AH
Dimension: φ19 *65 （3pcs total）
Operating condition: Temperature 5℃-40℃
Packing List:
Obturation Pen-----1 PC
Stand for pen-----1 PC
Pen Tip (Type F/FM/M/ML)-----4PCS
Charging base-----1 PC
Charger-----1PC
Battery-----1PCS
Endo Heated Pen+2 Tips
Model：Op-fill can be heat to 200 º C in 3s, can be melting all kinds of Gutta percha.It support the vertical compaction of Gutta percha for the root canal filling. It is intended exclusively for use by trained dentiet only in clinic or laboratory.
Safety caution:
The temperature of tip is very high during the surgery , in order to prevent from being burned, please avoid it directly contact to the soft tissue.
Specification：
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Packing size: 165*125*38mm
Usage:
Heat: Press the button to heat the tip, the Led indicator light red.The tip can reach working temperature within 3 second.
Charge:Put the obturation pen onto the charging base, the LED indicator light blue.The unit should be continuous charging more than 8 hours from low voltage to full charge.
Package includes:
Charging Base-----1 PC
Obturation Pen-----1 PC
Pen Tip -----2PCS
Endo Obturation System
A :Obturation Gun
1. It can be heated to 230℃ in 15S,which can melt all kinds of gutta percha.
2. Large battery capacity ,which can use long time.
3. Wireless 3D filling design.
4. Comfortable holding and easy to operate.
5. Gun needle screw design can effectively prevent excessive glue.
6. Auto idle Power Saving Mode,the device will turn off automatically after 15m of non-use.
7. Accurate temperature-control and thermal protector cap can prevent accidental scald.
B :Obturation Pen
1. The heater can be heated to 230℃ in 5S.
2. Option temperature:160、180、200、230℃.
3. Large capacity battery ,double battery charging and spare.
4. Holding comfortable,easy to use.
5. Wireless design,reduce wrist fatigue.
6. Own heating protection function,the heating maximum time of heater is 10S,more efficient and secure.
7. Heating key 360°stereo operation,accurate top control,3D filling more thoroughly.
Technical parameters：
Obturation Gun：
Li-ion chargeable Battery：3.7V 2200mAh
Heating time：15s to 230℃
Working temperature ：160 ℃、180 ℃、200 ℃、230 ℃
Input voltage：100V-240V AC
Output voltage：DC 5V,2A
Gun needle size：23G
Operating time：continuous use 1.5H
Obturation Pen：
Li-ion chargeable Battery：3.7V 2600mAh
Heating time：5s
Working temperature ：160 ℃、180 ℃、200 ℃、230 ℃
Input voltage：100V-240V AC
Output voltage：DC 5V,2A
Heat plunger size：F、FM、M
Operating time：continuous use 1.5H
Packing List:
Obturation Gun 1 PC
Adapter 1 PC
Charging Base 1 PC
Multi-tool 1 PC
Handpiece prop 1 PC
Needles 3PCS
Thermal Protector 2PCS
Prevent overflow ring 10PCS
Plunger 1PC
Cleaning Brush 1PC
Obturation pen 1PC
Charging base 1PC
Adopter 1PC
Batteries 2PC
Wrench 1PC
Pen Tips (Type 1*F/1*FM/1*M) 3PCS
Features:
A :Obturation Gun
1. It can be heated to 230℃ in 15S,which can melt all kinds of gutta percha.
2. Large battery capacity ,which can use long time.
3. Wireless 3D filling design.
4. Comfortable holding and easy to operate.
5. Gun needle screw design can effectively prevent excessive glue.
6. Auto idle Power Saving Mode,the device will turn off automatically after 15m of non-use.
7. Accurate temperature-control and thermal protector cap can prevent accidental scald.
B :Obturation Pen
1. The heater can be heated to 230℃ in 5S.
2. Option temperature:160、180、200、230℃.
3. Large capacity battery ,double battery charging and spare.
4. Holding comfortable,easy to use.
5. Wireless design,reduce wrist fatigue.
6. Own heating protection function,the heating maximum time of heater is 10S,more efficient and secure.
7. Heating key 360°stereo operation,accurate top control,3D filling more thoroughly.
Technical parameters：
Obturation Gun：
Li-ion chargeable Battery：3.7V 2200mAh
Heating time：15s to 230℃
Working temperature ：160 ℃、180 ℃、200 ℃、230 ℃
Input voltage：100V-240V AC
Output voltage：DC 5V,2A
Gun needle size：23G
Operating time：continuous use 1.5H
Obturation Pen：
Li-ion chargeable Battery：3.7V 2600mAh
Heating time：5s
Working temperature ：160 ℃、180 ℃、200 ℃、230 ℃
Input voltage：100V-240V AC
Output voltage：DC 5V,2A
Heat plunger size：F、FM、M
Operating time：continuous use 1.5H
Packing List:
Obturation Gun 1 PC
Adapter 1 PC
Charging Base 1 PC
Multi-tool 1 PC
Handpiece prop 1 PC
Needles 3PCS
Thermal Protector 2PCS
Prevent overflow ring 10PCS
Plunger 1PC
Cleaning Brush 1PC
Obturation pen 1PC
Charging base 1PC
Adopter 1PC
Batteries 2PC
Wrench 1PC
Pen Tips (Type 1*F/1*FM/1*M) 3PCS
Tooth gum Cutter A-BLADE
Feature
：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical
：
1. Charger voltage: 110V / 220V, 50-60Hz
2. Battery: 1.2V 2400mAh
3. Power: 2.5W
4. Weight:0.35kg
5. Packing size: 15 x 12 x 3.5 (CM
Charging
1, First,charge the instrument by connecting the charging station to a mains power socket
2, Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use
:
Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.
Important
: Never bend the tip while it is still in the handpiece.
1, Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2, As soon as the cutting tip is located directly on the canal access,press the operating button.
3, The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.
4, After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5, Remove the cutting tip from the handpiece after use.
Important:
Please don＇t continue to press the button more than 30 seconds.
Tooth Gum Cutter A-BLADE Ⅱ
Features:
1.Convenient design and beautiful shape
2.Using wireless charging technology ,stylish and fashionable
3.Fast heating and maximum temperature up to 260 ℃
4.2400mAh large capacity nickel cadmium rechargeable battery
5.Avoid frequently charging trouble
6.Fever needle can be repeatedly used
Technical Paraments
1. Charger voltage: AC100-240V 50/60HZ
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
Packing List:
1x main unit
4x tips
1x Box
1x English manual
Endo Apex Locator
a) Advanced multi-frequency network technology of apex location and automatic calibrating ensures the measurements are accurate.
b) Large colored display, touch button, different colors indicate the trajectory of the file clearly. c) High capacity rechargeable battery with 3.7V/2000mAh.
d) The File clip, Lip hook and Touch probe can be sterilized by autoclaved sterilizer.
e) Visual angle can be adjusted flexible.
Advantages:
1. Accuracy: America made high quality chip, digital measurement and multi-frequency measuring technology. Clinical practices showed that our accuracy is the same to company D from USA, company V from Gremany and company M from Japan.
2. Anti-interference, measuring results is not affected by different kinds of teeth or root canal environment.
3. Rechargeable lithium battery with high capacity, standby time can up to 6 months, which is much more longer than NI-MH battery being used by some other companies.
4. Large colored display, visual angle can be adjusted flexible.
5. Integral panel with touch inductive buttons, easy to clean and prevent cross infection.
The main technical specifications:
1. Battery: 3.7V/2000mAh
2. Adapter: ~100V-240V 50Hz/60Hz
3. Consumption power: ≤0.5W
4. Screen: 4.5' LCD
5. Buzzer alert: The buzzer will alert when the file is less than 2mm closed to the apex
6 Operation condition
a) Environment temperature: 0～40℃
b) Relative humidity: 10～85%RH.
c) Atmosphere pressure: 60kPa～106kPa
7. Dimensions: 131mm (Length) × 75mm (Width) × 105mm (Height)
8. Weight: 446g
Package:
1*Main Device: RPEX 6
2*Lip hook
2*Measuring Files
1*Measuring wire
2*File clip
1*Touch probe
1*Adapter
1*Battery
1* English Manual
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:Dentaljoy
City,State:SHENZHEN,China
Telephone number:0755-67530378
Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding!
Payment
We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance.
Shipping
The goods you ordered will be posted out in the second working day after the payment has been made. (We will inform you via email if any delay occurred due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal)
About Us
If you have any query or dissatisfaction, please find our customer service via eBay Message Center only.
If you send message via eBay message, we'll reply you within 24 working hours.
Thank you so much for your purchase. Wish you have a nice day! : -)
Classification Name: GUTTA-PERCHA
Product Code: EKM
Device Class: 1
Regulation Number: 872.3850
Medical Specialty: Dental
Re: K181087
Trade/Device Name: Apex Locator, DPEX III
Regulatory Class: Unclassified
Product Code: LQY
Dated: September 8, 2018
Received: September 19, 2018