Pressure Gauge | MNPT 1/4 inch 0 - 30 PSI Rear Mount - Sanitary SS304 (5 Pack)

Description

SKU
PG-MNPT-G025-0-30-RMT
Stainless Steel
SS304
Connection Type(s)
MNPT
Connection Size(s)
1/4 in.
Description
Rear mount pressure gauges are often attached to a CIP (clean in place) system pipe via a spool, to gauge water pressure being fed to the spray ball. A ball valve is commonly used to regulate the flow of water into the CIP pipe. A bottom mount pressure gauge is likely found on top of a tank to monitor interior pressure. Whichever mount suits your needs, the ability to quickly and easily read the pressure gauge is most important.
We recommend either a teflon tape or more permanent liquid to seal the gauge.
0-30 psi
304 Stainless Steel Casing
1/4 ;" Male NPT Fitting
Rear Mount
Glycerin filled casing
2.5" Face
+/- 3-2-3% Accuracy
Notes & Installation Instructions
To return gauge to zero after shipping, equalize the pressure using the rubber glycerin cap. This cap can either be pushed to the side to break the seal temporarily and allow the gauge to take in air, or leak some glycerin to return to zero. Or you can snip the tip of the cap per the instruction on the sticker when it is permanently installed so it will maintain zero. Gauge zero will move up and down with the local atmospheric pressure, so if cap is left un-trimmed, zeroing may need to be done periodically. The stainless steel case is filled with glycerine to protect the internals against vibration and pulsation. This prevents needle chatter and it is normal for a bubble to be in the fluid.
Gauge accuracy is maintained only in a temperature range of 0 to 140°F (-18 to 60°C), any measurement made outside of this range cannot be guaranteed accurate and may lead to malfunction. Gauges that have a +/- 3-2-3% accuracy is categorized as ASME B40.100 Grade B, meaning that the lower and upper 1/4 of the scale has 3% accuracy and the middle 1/2 is 2% accurate.
Quantity Discounts
Pack Qty
Discount
Price Each
Total Price
Single
0%
.23
.23
2 Pack
8%
.01
.02
3 Pack
14%
.35
.05
5 Pack
20%
.60
3.00
Notice About Inventory Quantity:
Please understand our quantity packs share from a communal inventory. A buyout of one pack type will consume inventory of other packs. Due to limitations, our system has a delay in updating other packs' stock quantities. Thank you graciously for understanding.
Customer favorite categories...
Tri Clamp Fittings
Adapters
Gaskets & Screens
Sanitary Clamps
Sanitary Valves
Spools
... many more
Botanical Extraction
Column End Caps
Condensers
Lids & Tubes
Sleeved / Jacketed Spools
Assembly Tanks
Weld Base Tanks
JIC / NPT Fittings
Ball Valves
JIC Fittings
JIC Hydraulic Hoses
JIC x NPT Adapters
NPT Fittings
Tri Clamp Adapters
Tank Accessories & Fabrication
Carbonation Stones
CIP Spray Balls
Hydrators / Hoppers / Spargers
Manways & Manholes
Racking Arms
... many more
Glacier Tanks - A family owned business...
Our Mission:
We're a growing company with big ambitions! Our affordable & quality-inspected products are a powerful combination that has helped us double in size by providing the best value in stainless steel equipment. Our 10-year mission is to innovate and improve the quality of life for everyone we work with: our employees, our customers, and our resident 4-legged family members.