USA Wireless Dental Endo Obturation System Gun Heated Pen Percha Gutta Tips

Description

Dental Endo Obturation System Gun Heated Pen Percha Gutta tips
Features:
A :Obturation Gun
1. It can be heated to 230℃ in 15S,which can melt all kinds of gutta percha.
2. Large battery capacity ,which can use long time.
3. Wireless 3D filling design.
4. Comfortable holding and easy to operate.
5. Gun needle screw design can effectively prevent excessive glue.
6. Auto idle Power Saving Mode,the device will turn off automatically after 15m of non-use.
7. Accurate temperature-control and thermal protector cap can prevent accidental scald.
B :Obturation Pen
1. The heater can be heated to 230℃ in 5S.
2. Option temperature:160、180、200、230℃.
3. Large capacity battery ,double battery charging and spare.
4. Holding comfortable,easy to use.
5. Wireless design,reduce wrist fatigue.
6. Own heating protection function,the heating maximum time of heater is 10S,more efficient and secure.
7. Heating key 360°stereo operation,accurate top control,3D filling more thoroughly.
Technical parameters：
Obturation Gun：
Li-ion chargeable Battery：3.7V 2200mAh
Heating time：15s to 230℃
Working temperature ：160 ℃、180 ℃、200 ℃、230 ℃
Input voltage：100V-240V AC
Output voltage：DC 5V,2A
Gun needle size：23G
Operating time：continuous use 1.5H
Obturation Pen：
Li-ion chargeable Battery：3.7V 2600mAh
Heating time：5s
Working temperature ：160 ℃、180 ℃、200 ℃、230 ℃
Input voltage：100V-240V AC
Output voltage：DC 5V,2A
Heat plunger size：F、FM、M
Operating time：continuous use 1.5H
Packing List:
Obturation Gun 1 PC
Charging Base 1 PC
Multi-tool 1 PC
Handpiece prop 1 PC
Needles 3PCS
Thermal Protector 2PCS
Prevent overflow ring 10PCS
Plunger 1PC
Cleaning Brush 1PC
Obturation pen 1PC
Charging base 1PC
Adopter 1PC
Batteries 2PC
Wrench 1PC
Pen Tips (Type 1*F/1*FM/1*M) 3PCS
+++++++++++++++++++++++++++++++++++++++++
Obturation Pen J1SS
Feature:
Obturation Pen
Temperature sensor IC type
Heating time 2 Seconds
Temperature range 150-350 ℃
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100-240V Output: DC 4.5V
Charging time 4 houra
Continuous heat-up time for gun after fully charging 60 minutes
Continuous heat-up time for pen after fully charing 30 minutes
Battery (Li-on)
Capacity: DC3.6 V 2.2AH
Dimension: φ19 *65 （
1pc total
）
Operating condition: Temperature 5℃-40℃
Packing List:
Obturation Pen-----1 PC
Stand for pen-----1 PC
Pen Tip (Type F/FM/M/ML)-----4PCS
Charging base-----1 PC
Charger-----1PC
Battery-----1 PC
+++++++++++++++++++++++++++++++++++
Obturation System Endo Heated Pen westcode
Feature：
Model：Op-fill can be heat to 200 º C in 3s, can be melting all kinds of Gutta percha.It support the vertical compaction of Gutta percha for the root canal filling.
It is intended exclusively for use by trained dentiet only in clinic or laboratory.
Safety caution:
The temperature of tip is very high during the surgery , in order to prevent from being burned, please avoid it directly contact to the soft tissue.
Specification：
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Packing size: 165*125*38mm
Usage:
Heat: Press the button to heat the tip, the Led indicator light red.The tip can reach working temperature within 3 second.
Charge:Put the obturation pen onto the charging base, the LED indicator light blue.The unit should be continuous charging more than 8 hours from low voltage to full charge.
Package includes:
Charging Base-----1 PC
Obturation Pen-----1 PC
Pen Tip -----2PCS
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory  agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your  status as an authorized purchaser of this item before shipping of the item.
Seller name:MXDENT
City,State:SHENZHEN,China
Telephone number:0755-14725869
Re: K181087
Trade/Device Name: Apex Locator, DPEX III
Regulatory Class: Unclassified
Product Code: LQY
Dated: September 8, 2018
Received: September 19, 2018